John Deere Ground Engaging Tools Buying Guide
Find the right bucket teeth, cutting edges, moldboards, and mounts for your John Deere machine. These parts take the hit so your buckets, blades, and frame don't. Match the part to your machine model, serial number, and bucket or blade width before you order.
Ground Engagement Tools Overview
Browse John Deere ground engagement tools currently available in our store.
Ready to find the part you need?
See the full Ground Engagement Tools category to browse all part types.
VIEW ALL GROUND ENGAGEMENT TOOLSLooking for more John Deere parts?
Browse Doggett's complete John Deere parts catalog for construction and heavy equipment.
BROWSE ALL JOHN DEERE PARTSSigns You Need New Ground Engagement Tools
| Sign | Where to Check | What to Do |
|---|---|---|
| Bucket struggles to dig into hard ground | Tips of the bucket teeth | Replace rounded or short teeth with new Bucket Teeth |
| Bucket edge is worn thin, wavy, or chipped | Bottom edge of the loader or backhoe bucket | Replace it with a new edge from Bucket Cutting Edges |
| Edge wear is close to the bucket or blade itself | Where the cutting edge bolts on | Fit a new edge or edge kit from Cutting Edges before the bucket or blade wears |
| Dozer blade leaves an uneven grade | Bottom edge of the dozer blade | Replace worn sections with Dozer Cutting Edges |
| Blade face is cracked, bent, or worn through | Front of the moldboard or blade | Replace it with a part from Moldboards & Blades |
| Attachment sits loose or out of line when lifting | Lift arms and mounting points | Replace worn parts with Lift Arms & Mountings |
What to Look For When Buying Ground Engagement Tools
| Factor | What To Know |
|---|---|
| Compatibility | Match the part to your machine model and serial number. |
| Correct Part Number | Use the OEM number from your old part or parts catalog. |
| Width and Hole Pattern | Edges must match your bucket or blade width and bolt spacing. |
| Edge Type | Reversible edges flip over to give a second wear side. |
| Tooth Style | Choose a tooth shape for general digging, rock, or tight trenching. |
| Mounting Hardware | Fit new bolts and nuts with every edge so it seats tight. |
| Wear Condition | Replace parts before wear reaches the bucket, blade, or adapter. |
| Genuine Parts | Genuine John Deere parts are built to fit your machine. |
How Ground Engagement Tools Protect Your Machine
Each part takes the wear so the more costly parts behind it don't have to.
- Ground Contact
- Bucket Teeth
- Cutting Edge
- Bucket or Moldboard
- Lift Arms & Mountings
- Machine Frame
Safety & Maintenance Tips
- Lower the bucket or blade to the ground and shut off the machine before service.
- Never work under a bucket or blade held up by hydraulics alone.
- Wear gloves and eye protection, since edges and teeth are heavy and sharp.
- Use a lifting aid for heavy edges and moldboards.
- Fit new bolts and nuts with every edge and tighten them to spec.
- Check teeth and edges daily and replace them before wear reaches the base metal.
- Flip reversible edges before the first side wears through.
Why Buy Ground Engagement Tools from Doggett?
We offer genuine John Deere parts backed by expert parts support and fast delivery. Our team helps you match the part to your machine and bucket or blade so you can get back to digging and grading.
- Genuine John Deere Parts
- Expert Parts Support
- Large Parts Inventory
- Fast Shipping & Availability
- Multiple Locations Across Texas & Louisiana
- Dealer-Backed Service
Not sure which edge or tooth fits?
Our parts team can match the part from your machine model, serial number, and bucket or blade width.
Need it today? Bring the old part in and we'll match it:
FIND A DEALERFrequently Asked Questions
What are ground engaging tools?
They are the parts that touch the ground first, such as bucket teeth, cutting edges, and moldboards, along with the arms and mounts that hold them in place. They take the wear from digging, grading, and loading so your bucket, blade, and machine frame last longer. Doggett stocks six part types for John Deere equipment.
How often should bucket teeth be replaced?
There is no fixed interval, because wear depends on the ground you dig. Replace teeth when they are rounded, shorter, or cracked, and always before wear reaches the adapter they mount on. Rock and sandy soil wear teeth faster than clay or topsoil, so check them daily on hard jobs. For tooth types, adapters, and locks, see our Bucket Teeth page.
What is the difference between a bucket cutting edge and a dozer cutting edge?
A bucket edge mounts along the lip of a loader or backhoe bucket, while a dozer edge bolts to the bottom of the dozer blade's moldboard and is often made in sections. They are sized and drilled for different machines, so they are not interchangeable. Order by machine model and part number.
Should I choose a bolt-on or weld-on cutting edge?
A bolt-on edge can be swapped in the field with hand tools and protects the bucket's base edge from wear. A weld-on edge becomes part of the bucket and needs a welder to replace. Most loader and dozer owners choose bolt-on edges for faster changes and less downtime.
Can I flip a worn cutting edge?
Yes, if the edge is reversible. Reversible edges are beveled on both sides, so you can turn them over when the first side wears down and get a second wear life. Check the product page or ask the parts team whether your edge is reversible.
How do I find the right part for my machine?
Start with your machine model and serial number, then match the part number from your old part or parts catalog. For edges, also confirm the width and the number and spacing of the bolt holes. A Doggett parts specialist can confirm the fit before you order.